THE POWER PANEL 2000 takes three current and voltage inputs and subsequently displays them as well as Watt, Var, Watt Hour and Var Hours. The accuracy is .2%, and 0.6" greater than 20 It. LCD displays are used for Watt/Var Hours. Outputs for all parameters are available with these options: 0 to 1mA, 0 to 5VDC, 4 to 20mADC, and digital (RS 232 or RS 485). Pulse outputs are available for Watt/Var Hours. Auxiliary Power is 115V AC/125VDC (others available). Digital outputs using RS 485 two wire can be transmitted directly to a R1U, PLC, PC or connected to other IEDS that use D NP 3.0 or Modbus protocols.

This unit eliminates costly training. It is not necessary to push buttons or scroll to operate this unit. It replaces over 20 individual instruments. Virtually anyone can instantly see the primary readings to analyze system condition.

All Arga meters are designed and manufactured in the U.S.A. Delivery is stock to 8 weeks with a full year warranty. Software support is available.

OPTIONS

OUTPUTS: (For 0 to 5A, 0 to 150V, 0 to ±1500 W/Vars x CTR x PTR)

15-076-I01 has 8 outputs of 0 to 1mADC into 0 to 10K load (± for W & V AR)
15-076-I420 has 6 outputs of 4 to 20mADC into 0 to 500Ohm; plus 2 outputs of 12 ±8mADC
15-076-J3.0 has DNP3.0 & MODBUS protocols 8 readings on RS485, 2 wire.

ELEMENTS:

15-076-2E for 3Ø, 3 wire, 2 PT's, 2 CT's.
15-076-2.5E for 3Ø, 4 wire, 2 PT's, 3 CT'S. S .

PANEL:

-15-076A-* for panel mounting is 3.97 high leaving a .25 border

AUX. POWER: 12, 25, 48, VDC (i.e.: 15-076-48V)